Butterfly valve manufacturers

　Butterfly valve is a simple structure control valve, which can be used for switching control of low-pressure pipeline media. It refers to a valve whose closing part is a disc and rotates around the valve shaft to open and close.

Butterfly valve manufacturers

Butterfly valves can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal, radioactive media and other types of fluids. It mainly cuts and throttles pipes. The opening and closing part is a disc-shaped butterfly plate that rotates around its own axis in the valve body to achieve the purpose of opening and closing or adjusting. Butterfly valve manufacturers

A butterfly valve is a valve that opens, closes, or regulates the flow rate of a medium by reciprocating a disc switch element by approximately 90 degrees. It not only has simple structure, small size, light weight, less material consumption, small installation size, small driving torque, simple and fast operation, but also has good flow regulation function and close sealing characteristics. It is one of the fastest developing valve varieties in the past decade. The variety and number of its uses continue to develop in the direction of high temperature, high pressure, large diameter, high sealing performance, long service life, excellent regulating characteristics and multi-purpose of a valve. Its reliability and other performance indicators have reached a high level. Butterfly valve manufacturers

Suitable for flow regulation. Because the pressure loss in the pipeline is large, about three times that of the gate valve, the impact of the pressure loss on the pipeline system should be fully considered in the selection, and the strength of the butterfly valve under the pressure of the pipeline medium should also be considered when closed. In addition, the operating temperature limits of the elastic seat material at high temperatures must be considered.

Butterfly valve manufacturers have a small structural length and overall height, fast opening and closing speed, and good fluid control characteristics. This structural principle is suitable for manufacturing large diameter valves. When the use of traffic needs to be controlled, it is important to choose the specifications and types correctly so that they can work properly and efficiently.